YardPour

Round tube forms · pads · bells

Sonotube Concrete Calculator for Tube-Formed Piers

This sonotube concrete calculator is for piers set in round cardboard tube forms, usually under a deck, porch or pole barn. It totals a filled round tube, an optional footing pad under each tube, and an optional bell or spread footing. Pick a standard tube size or enter a custom diameter, fill height in feet, and count. Results show cubic feet, cubic yards, and 40, 60, and 80 lb bag counts with editable yields. Pouring a square or decorative column instead? Use the concrete column calculator. For one post set straight in the ground, use the post hole calculator.

Updated Free · no sign-up · inputs stay in your browser

Sonotube / round form
ft
%
Bag yield (ft³)
ft³
ft³
ft³

80 lb bags (whole job)

6bags

Tube volume
3.14 ft³
Net volume
3.14 ft³
Order volume
3.14 ft³
Cubic yards
0.116 yd³
BagWhole job
40 lb11
60 lb7
80 lb6
Show the math
  1. Tube: π × (12 ÷ 2)² in² × 4 ft × 1 = 3.14 ft³
  2. Net 3.14 ft³ → order 3.14 ft³ (0.116 yd³)

For square columns or hollow tubes, use the concrete column calculator.

Sonotube pier diagram: tube diameter, fill height measured to the top of the tube, and an optional footing pad with its width and thickness

Sonotube volume formula

tube: V = π × (D ÷ 2)² × H × count (D in in → ft, H in ft) round pad: V = π × (D_pad ÷ 2)² × depth × count square pad: V = side² × depth × count bell: V = (π × h ÷ 3) × (R₁² + R₁ R₂ + R₂²) (frustum, h and radii in in) yd³ = total ft³ ÷ 27

A bell or flared footing under the tube is modeled as a concrete frustum and added to the cylinder volume before bags and waste.

Worked example: one 12 in tube, 4 ft fill, no pad

  1. Radius: 12 ÷ 2 = 6 in = 0.5 ft.
  2. Area: π × 0.5² = 0.785 ft².
  3. Volume: 0.785 × 4 = 3.14 ft³ = 0.116 yd³.
  4. 80 lb bags: 3.14 ÷ 0.60 = 5.2 → 6 bags.

Worked example: two 10 in tubes, 3 ft fill, 24 in round pad, 8 in deep

  1. Tube each: π × (10 ÷ 24)² × 3 = 1.36 ft³; × 2 = 2.73 ft³.
  2. Pad each: π × 12² × 8 ÷ 1,728 = 2.09 ft³; × 2 = 4.18 ft³.
  3. Total net: 6.91 ft³ = 0.26 yd³.
  4. 80 lb bags: 6.91 ÷ 0.60 = 11.5 → 12 bags.

Concrete per foot of tube (net, no waste)

80 lb bags at 0.60 ft³ per bag. Fill height is per tube.

Tube sizeft³ per ft height80 lb bags per ftBags for 4 ft fill (one tube)
6 in0.1960.332
8 in0.3490.583
10 in0.5450.914
12 in0.7851.316
14 in1.0691.788
16 in1.3962.3310
18 in1.7672.9512
20 in2.1823.6415
24 in3.1425.2421
30 in4.9098.1833
36 in7.06911.7848

Sonotube sizing chart: bags and yards by diameter and depth

One tube, no pad, 10% waste included. 80 lb bags at 0.60 ft³, 60 lb bags at 0.45 ft³, rounded up. Multiply by your number of piers, or let the calculator do it.

Tube sizeFill depthCubic feetCubic yards80 lb bags60 lb bags
8 in3 ft1.150.04323
8 in4 ft1.540.05734
8 in5 ft1.920.07145
10 in3 ft1.800.06734
10 in4 ft2.400.08946
10 in5 ft3.000.11157
12 in3 ft2.590.09656
12 in4 ft3.460.12868
12 in5 ft4.320.160810
16 in3 ft4.610.171811
16 in4 ft6.140.2281114
16 in5 ft7.680.2841318
18 in3 ft5.830.2161013
18 in4 ft7.780.2881318
18 in5 ft9.720.3601722

Worked example: six 10 in deck piers, 4 ft deep, 10% waste

  1. Area of one tube: π × (10 ÷ 24)² = 0.545 ft² per foot of height.
  2. One pier: 0.545 × 4 = 2.18 ft³. Six piers: 13.09 ft³.
  3. Add 10% waste: 13.09 × 1.10 = 14.40 ft³ = 0.53 yd³.
  4. 80 lb bags: 14.40 ÷ 0.60 = 24 bags (or 32 bags of 60 lb).

Around half a yard, many people choose between bags mixed on site and a small ready-mix load. Check your supplier's minimum order and short-load fee first.

Choosing a tube diameter

Your deck or structure plans, or the local building department, set the pier diameter and depth, usually based on the load and your frost depth. Use those numbers here. Bigger tubes add concrete fast because volume grows with the square of the diameter: a 12 in tube holds 44% more than a 10 in tube at the same depth.

Square columns and hollow tubes

This page is for solid round tube forms. For square columns, hollow tubes, or several shapes on one order, use the concrete column calculator. Fence and deck posts in dug holes belong on the post hole concrete calculator or fence post concrete calculator.

Related field guides

Cite this page

YardPour Team. (November 17, 2026). Sonotube Concrete Calculator for Tube-Formed Piers. YardPour. https://yardpour.com/sonotube-calculator/

Accessed October 11, 2026. Calculator inputs stay in your browser unless you use a share link.

Embed this calculator on your site

The embed is noindex and shows no ads. Use the brand name YardPour in the attribution link.

<iframe src="https://yardpour.com/embed/sonotube/" title="YardPour calculator" width="100%" height="720" loading="lazy" style="border:0;max-width:960px"></iframe>
<p><a href="https://yardpour.com/sonotube-calculator/">YardPour</a></p>

Sources

Checked October 11, 2026.

Frequently asked questions

How much concrete is in a 12 inch Sonotube per foot?

About 0.785 cubic feet per foot of height. A 4 ft fill is 3.14 cubic feet, or 0.116 cubic yards, which is 6 bags of 80 lb concrete at 0.60 cubic feet per bag.

How do I calculate concrete for a Sonotube with a pad and bell?

Add the tube cylinder, a round or square pad under each tube, and an optional bell footing modeled as a frustum. The calculator totals all three before waste and bags.

What Sonotube sizes are sold?

Round forms are commonly sold from 6 in through 36 in inside diameter in 2 in steps. Pick the label size that matches your form, or enter a custom inside diameter.

How many bags of concrete for a 10 inch Sonotube 4 ft tall?

The tube alone is about 2.18 cubic feet. At 0.60 cubic feet per 80 lb bag that is 3.6 bags, so buy 4 bags before waste.

Is YardPour affiliated with Sonotube?

No. Sonotube is a trademark of Sonoco. YardPour is not affiliated with Sonoco. The math works for any round tube form.

Should I use this page or the column calculator?

Use this page when you are filling branded round tube forms and may add a pad or bell. Use the concrete column calculator for square columns, hollow tubes, or mixed shapes on one job.