How much crushed concrete do I need?
Cubic yards equal length × width × depth in feet, divided by 27. Order extra for compaction—the loose pile settles when you plate-compact in lifts. Example: a 20 × 12 ft pad with a 4 in compacted base is 20 × 12 × 0.333 ÷ 27 = 2.96 yd³ net; with 20% compaction allowance, order about 3.55 yd³.
Yards vs tons
Quarries and recyclers may quote by the cubic yard or by the ton. Density depends on moisture and gradation, so enter the tons-per-yard figure your supplier gives you; the calculator multiplies order yards by that field. The 1.4 t/yd³ default is a planning number for loose material, not a measured value.
Base depth for driveways, patios and sheds
Many residential projects use about 4 inches of compacted base for patios and walks, and 4 to 6 inches for driveways or soft soil—the same guidance as for crushed stone in our gravel base guide. This is a volume tool only; frost depth and structural design come from your plans or local code.
Crushed concrete vs gravel
Recycled concrete aggregate (RCA) is angular and compacts similarly to crusher-run stone when well graded. It is often used for driveways and road bases where local supply is available. Virgin gravel may drain slightly differently; your supplier can describe the gradation. For choosing stone types and compaction steps, start with the gravel under a concrete slab article.
What "21AA" means
21AA is one of the dense-graded aggregate gradations in the Michigan DOT standard specifications—a particle-size band for road base, not a source material (MDOT Standard Specifications). Ask whether a "21AA" product is natural stone or crushed concrete; recycled concrete may also be sold under a different regional name. Describe your use ("compactable base under a patio") when ordering.
Crushed concrete by square feet
Every 100 square feet of base at 4 inches compacted is 1.23 yd³ net, or about 1.5 yd³ to order with a 20% compaction allowance. The table uses the calculator's defaults (20% allowance, 1.4 tons per loose cubic yard), so swap in your supplier's numbers for a final order.
| Area | 4 in: yd³ | 4 in: tons | 6 in: yd³ | 6 in: tons |
|---|---|---|---|---|
| 100 sq ft | 1.48 | 2.1 | 2.22 | 3.1 |
| 200 sq ft | 2.96 | 4.1 | 4.44 | 6.2 |
| 400 sq ft | 5.93 | 8.3 | 8.89 | 12.4 |
| 600 sq ft | 8.89 | 12.4 | 13.33 | 18.7 |
| 1,000 sq ft | 14.81 | 20.7 | 22.22 | 31.1 |
Worked example: 12 × 50 ft driveway base, 6 in compacted
- Area: 12 × 50 = 600 sq ft.
- Net volume: 600 × 6 ÷ 324 = 11.11 yd³.
- With 20% for compaction: 13.33 yd³ loose.
- At 1.4 tons per loose yard: about 18.7 tons. If the yard sells by the ton, round up to the truck sizes they offer.
Placing 6 inches usually means two compacted lifts rather than one thick pass—ask your rental yard what depth its plate compactor handles.
Checking the tons figure
A cross-check for the default: FHWA's reclaimed concrete material guideline summarizes a six-year Long Island study that found a mean dry density of 129 lb/ft³ for processed recycled concrete. That is 129 × 27 = 3,483 lb, or about 1.74 tons per compacted cubic yard. With the calculator's defaults, each compacted yard is ordered as 1.2 loose yards × 1.4 t = 1.68 tons, within about 4% of that figure. Wet material weighs more, so a supplier's ticket can run higher than both.
FHWA also notes that recycled concrete has a lower compacted unit weight than conventional mineral aggregate, which gives a higher yield (more volume for the same weight). If you are comparing a crushed concrete quote by the ton with a virgin stone quote by the ton, compare cost per compacted yard, not per ton.
Sources
- Portland Cement Association, Design and Control of Concrete Mixtures (overview)
- FHWA-RD-97-148, Reclaimed Concrete Material: Material Description (User Guidelines for Waste and Byproduct Materials in Pavement Construction)
Checked October 11, 2026.